What does Drywise dryer do?

The Drywise filament dryer takes out the guesswork when 3D printing hygroscopic materials. The Drywise needs about 50 minutes to pre-treat your filament and bring it to the best printing conditions before 3D printing can start. An in-line drying design assures that long 3D prints will always be printed with consistent material dried to best printing conditions.


Why is filament drying important?


Hygroscopic FDM filaments tend to absorb significant amounts of moisture from the environment over the course of a few days. Some materials cannot be printed out of the box due to high moisture levels already present in the material.


The presence of moisture in filaments can cause visible artefacts during printing, including: poor surface finish, stringing and oozing.


Moisture in filaments can potentially cause print failure and affect the mechanical properties of the printed part.


As a result moisture sensitive materials need to be dried prior to printing, however without special storage or pre -treatment the print quality can still degrade noticeably, especially during the course of a longer print

Image Product


Key Features 

Image Product

An in-line design dries only the section of filament that is 3D printed, reducing the amount of work needed. 

Smart sensors help to dry filament to the best 3D printing condition, avoiding overheating and over drying. 

User Friendly 
A user friendly UI guides the user all the way. Exchangeable and rechargeable desiccant cartridges will eliminate down time. 

Smart sensors detect idle moments and switch off heaters to ensure safety.

The list of certified filaments with calibrated settings is constantly growing.

More Benefits of the Drywise Filament Dryer.

As an active drying in-line system, the Drywise dryer only dries that part of the filament used for printing, during the 3D printing process as opposed to drying the whole spool. Conventional methods can take many hours to dry wet filament and can damage the filament spool and/or the filament itself. Further more once out of the oven the filament will restart absorbing moisture immediately.

The filament drying process is pre-calibrated and tailored for every material type, taking out the guesswork required when using traditional drying methods.


Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
Drywise In-Line Filament Dryer
  • 1.75 mm
  • 2.85 mm

Ask Us Questions

Why must I keep my 3D printing filament dry?

A large majority of 3D printing plastics absorb moisture from the surrounding air which can significantly impact the quality of your 3D prints. These plastics are known as hygroscopic. As the filament is extruded, moisture absorbed in the plastic will rapidly expand, boil and rupture, forming bubbles in the extruded plastic. These bubbles can have a significant impact on the surface quality, layer adhesion and mechanical performance of your 3D printed parts. To avoid this, we recommend using Drywise in-line filament dryer.

How does your product work? 

3D printing plastics are prone to take in ambient moisture, which results in reduced print quality. Our dryer pre-treats the filament to best printing conditions.

Where is Drywise based?

We are solely an online brand, but we operate out of Malta.  

How long will it take me to get my order?  

Processing for orders can take 2 to 5 days. Then EU Shipping takes 1 week. We are currently only accepting pre-orders though. We will start shipping our current orders in Q2 2022.  

EU Shipping Only for all Pre Orders.

What do I do if my order is damaged? 

We are so sorry to hear that your order arrived in less than pristine condition! Please let us make it right. Our customer service team will be more than happy to assist with processing a replacement order or issuing a refund. You may contact our customer service team by sending us an email at drywise@thought3d.com.  

Secure Your In-Line Filament Dryer Today